EAMITARD H
Concrete Surface Retarder for Horizontal Exposed
PRODUCT DESCRIPTION
EAMITARD H is a water base chemical concrete surface retarder used to achieve an architectural exposed aggregate look on horizontal concrete surfaces.
EAMITARD H is designed to delay the set of mortar paste on the surface to a controlled depth. The surface retarded paste should be removed by washing and brushing after the set of the base concrete.
PRODUCT DOCUMENTS
Technical Data Sheet
TYPICAL APPLICATIONS
EAMITARD H is designed to be used in:
-
Creation of exposed aggregate surface finish on horizontal surfaces.
-
Horizontal precast panels.
-
Decorative sidewalks and walkways.
-
Slip-resistant surfaces.
-
Formulations for horizontal applications.
-
For concrete slabs prior to the granolithic application of a screed or thick layer surface topping.
-
For exposing aggregate on horizontal 'kicker' and construction joints thus ensuring good bonding of the fresh concrete, eliminating the requirement for mechanical preparation of these surfaces.
PRODUCT FEATURES
-
Easy to mix and to apply.
-
Economical.
-
Water-based.
-
Works quickly and effectively.
-
Provides up to 1/4" (6 mm) depth retardation.
-
Reduces cost of preparing surfaces for waterproofing, stucco or plaster application. Eliminates need for sandblasting.
-
Controlled retardation of surface set no residual retardation to interfere with subsequent.
-
Water based, non-flammable and non-hazardous.
-
Controlled retardation of concrete surface.
-
Produces consistent textured and attractive look.
-
Consistent exposed aggregate surface.
-
Improved bond of fresh concrete to exposed surfaces.