EAMIPROOF AR 600
Fluid Applied Elastomeric Acrylic Waterproofing and Anti Carbonation Membrane.
PRODUCT DESCRIPTION
EAMIPROOF AR 600 is a one part protective, decorative, anti-fungus, non-toxic, acrylic based waterproofing & weatherproofing liquid membrane.
It is designed to provide a high degree of elasticity and high adhesion to most substrates.
The cured membrane provides high elongation with a high crack bridging ability.
It is produced in three grades:
EAMIPROOF AR 600 External, EAMIPROOF AR 600 Internal and EAMIPROOF AR 600 Texture.
PRODUCT DOCUMENTS
Technical Data Sheet
TYPICAL APPLICATIONS
EAMIPROOF AR 600 is used as a waterproofing membrane and weather proofing coating in:
-
Concrete bridges & tunnels.
-
Floors: Under and / or above screed to provide a damp proof membrane.
-
Basements: As a part of a water-proofing system beneath ground level.
-
Walls: Under and / or above render or plaster as a water and CO2 barrier.
-
Roofs: As the main waterproofing coat or as part of a repair system.
-
Tiling: As a protection coat under tiles in wet areas, bathrooms, food processing areas, balconies … etc.
-
EAMIPROOF AR 600 can be used also as a gas barrier to minimize carbon dioxide & methane attack (as part of anti-carbonation system).
-
As an optimal weather protection system for concrete surfaces in conjunction with EAMIGARD SA 80 and EAMIGARD PRIME SEAL (please review separate data sheet).
PRODUCT FEATURES
-
Highly resistant to carbon dioxide penetration.
-
Can be applied to damp surfaces.
-
Easy to use by brush roller or spray.
-
Non-toxic.
-
Non hazardous, water base product.
-
Environmental friendly.
-
Provides high resistance to the effects of weathering and U.V. degradation.
-
High flexibility and excellent crack bridging properties.
-
Good adhesion to concrete.
-
Non-staining.
-
Quick drying.
STANDARDS
EAMIPROOF AR 600 is tested according to the following:
-
BS 8204 Part 3, Method B3. BS 903 Part A17 & Part A2.
-
BS 6319 Part 4, BS 3177 & ES 1539 & EN 1062.