​​EAMIC INJECT SEAL is a low viscosity hydrophobic polyurethane formulation. The system is comprised of a base resin along with an accelerator component. EAMIC Inject Seal is typically used to repair cracks or fill joints in concrete structures. The accelerator is used by the experienced installer to manipulate the reaction profile as warranted by job site conditions. Being a hydrophobic formulation, when reacted with minimal amounts of water, the resulting foam will maintain its physical form and will repel water & will not allow to pass through, also will not be subjected to shrinkage due to wet/dry cycles.
EAMIC Inject Seal produces a closed cell polyurethane grout.